- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Study the Adhesion Force of Tubular Shaped Fiber Reinforced Composites | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 26, Issue 7, 2008, Pages 753-761 PDF (273.58 K) | ||
| DOI: 10.30684/etj.26.7.3 | ||
| Authors | ||
| Hussein Ali Hamid AL-Abdly; Najat j. Saleh; Adnan A. AbdulRazak; Hassen Sh. Majdi | ||
| Abstract | ||
| In the present work tubular –shaped fiber reinforced composites were manufactured by using two types of resin epoxy (EP) and unsaturated polyester (UP),each was separately reinforced with glass, carbon and kevlar-49 fibers (filament and woven roving), hybrid reinforcement composites of these fibers were also prepared. The adhesion force test of the prepared specimens was carried out. These adhesion forces exhibited a peak value at a percent of hardener/resin (H/R)= 3% for UP matrix with all type of fiber arrangements while 30% was obtained for EP matrix .Such behavior was declined with increase in temperatures. Glass transition temperatures were determined from these measurements, and found to be 90°C for EP– glass and 83 °C for UP –glass composites. | ||
|
Statistics Article View: 291 PDF Download: 146 |
||