- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Relation Between Standerd Penetration Test And Skin Resistance Of Driven Concrete Pile In Over-consolidated Clay Soil | ||
| Journal of Engineering | ||
| Article 1, Volume 17, Issue 5, 2011, Pages 1355-1370 | ||
| Author | ||
| Zuhair Kadhim JahanGer | ||
| Abstract | ||
| In this research the relation between skin resistances and standard penetration test of over consolidated clay soils has been studied. The research includes doing boreholes at Babil governorate in Iraq to get undisturbed samples and standard penetration test. Determination skin friction from direct shear test between smooth concrete and soil was explored in laboratory for design purposes and correlated with standard penetration test values. In many foundation design problems, the shear strength between soil and foundation materials were estimated or correlated without any direct methods for measurement. Twelve strain controlled direct shear tests were performed simulate the shear strength interaction between smooth concrete and undisturbed over consolidated silty clay, determine the soil – foundation interface friction, considering the following variables :(1) over consolidation ratio OCR between 1.4 to 2.4 (2) Concrete, smooth surface, (3) Undisturbed samples, (4) Variation of the normal load between the friction surface. The results showed that both cohesion and internal friction should be considered in evaluating skin friction. The results of cohesion and angle of internal friction were correlate with the standard penetration test SPT –N . Interface friction angle was 14.5° , while the adhesion was 15.5 kPa. The ultimate shear strength was mobilized through 10%- 16% strain in the direction of shear surface. . A fairly good correlation between the N70-value and the interface friction parameters were established for determination unit skin friction for driven piles. Finally, based on the test results, a simple relation was proposed to relate the N70 value and interface friction of silty clay soils for a range of N70 between 12 and 20 | ||
| Keywords | ||
| undisturbed; silty clay; soil; concrete skin friction; Direct shear test; SPT | ||
|
Statistics Article View: 114 PDF Download: 100 |
||