- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Mechanical and Thermal Properties of Heterogonous Epoxy -Cellulose Fiber- Micron Ceramic Particles Composite Systems | ||
| Engineering and Technology Journal | ||
| Article 1, Volume 29, Issue 10, 2011, Pages 1962-1970 PDF (561.66 K) | ||
| DOI: 10.30684/etj.29.10.8 | ||
| Authors | ||
| Falak O. Abas1; Sarmad. I. Ibrahim2; Raghad U. Abass2 | ||
| 1Engineering College, University of koya/ Dohok | ||
| 2Material Engineering Department,University of Technology/Baghdad | ||
| Abstract | ||
| The new improved heterogeneous epoxy systems were successfully synthesized at different volume fraction and particle size for (0.1-50 μm) p.s and (10, 20, 30, and 40 %vol..) additives ratios respectively. The base epoxy firstly cured with the above additive at these ratio by use of mechanical mixing without heat then mold and solidified for 48 hrs. Different thermal and mechanical properties achieved at different volume frication and partial size such as ( thermal conductivity, bending resistance , impact resistance and hardness). The results of final heterogeneous epoxy ceramic systems characteristic properties are: Lower thermal conductivity at for boron heterogeneous systems than other systems of Al2O3 ,SiO2, ZrO2 at 0.13 and o.37 for small and large range p.s than others of 0.18,o.21,0.37,and 0.37 for small and large range p.s than others of 0.18,0.21,0.37, and 0.41,0.49,0.55 w/mc°. Hardness of shore is higher for boron heterogeneous system than others one at 38 for large p.s and 87 for small one than others of 79,75,73 and 84,82,81 respectively . The high value of impact strength for boron system for small and large p.s for than others at 4.1 and 3 than 2.8,2.1,1.8 and 3.8 resistance at small and large p.s for boron heterogonous System than others at 0.25, and 3.8, than 0.28 , 0.35, 0.4 and 0.42, 0.43 and 0. 46 respectively. | ||
| Keywords | ||
| fine micron particles; heterogeneous; Epoxy system; characteristic mechanical and thermal properties | ||
|
Statistics Article View: 302 PDF Download: 143 |
||