Study of Thermal Behavior for Epoxy and Some of Its Composites in Different Temperatures Using Water Bath Technique

Ghanem M.Salih, Zaid

doi:10.30684/etj.29.13.8

	Study of Thermal Behavior for Epoxy and Some of Its Composites in Different Temperatures Using Water Bath Technique
Engineering and Technology Journal
Article 1, Volume 29, Issue 13, 2011, Pages 2680-2688 PDF (295.1 K)
DOI: 10.30684/etj.29.13.8
Author
Zaid Ghanem M.Salih
Abstract
The aim of this research is to study the property of thermal conductivity for epoxy and some of its composites at room temperature, and various temperatures for various period of immersion using water bath technique. Three samples are prepared by hand lay-up method. The first sample is epoxy resin, the second sample is epoxy resin reinforced with Aluminum powder, and the third sample is epoxy resin reinforced with Al fibers. The volume fraction is 15%. Thermal conductivity is measured for three samples at room temperature (30 ºC) using Lee’s disc device. Thermal conductivity is measured for samples after immersion in water bath for (30, 60) minutes at (40, 50) ºC. Activation energy is measured for samples. Results show generally that reinforcing with Al powder and fibers increases thermal conductivity. Also thermal conductivity increase for samples at 50 ºC after immersion in water bath at this temperature as compared with other temperatures. It is found that thermal conductivity, generally, decreases by increasing the period of immersion in water bath whereas thermal conductivity recorded lower values after immersion for 60 minutes. Results shows that sample of epoxy reinforced with Al powder have the highest value of activation energy as compared with other samples.

Statistics Article View: 358 PDF Download: 166