- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
Effect of Resin Stages on the Dimensional Accuracy of Denture base cured by long and short curing method in a conventional water bath | ||
| MUSTANSIRIA DENTAL JOURNAL | ||
| Article 1, Volume 8, Issue 1, 2011, Pages 33-39 | ||
| Authors | ||
| Dr. Sundus Ismail Al-azzwai; ; Dr. Fakria Ismail Al-azzawi; ; Dr. Sahar Abdul-Razaq Naji; | ||
| Abstract | ||
| Acrylic resin is the most widely used material in prosthetic dentistry and its dimensional accuracy is most important factor in successfulness denture constructer. The aim of this study was to investigate the dimensional changes of denture base acrylic cured by long and short curing method by using conventional water bath. 60 maxillary wax bases were made and randomly assigned in 3 groups specimens according to the stringy, dough like and rubbery stages of the acrylic resin cured by: 1-long curing cycle: curing the resin at 74 C° for 9 hours. 2-Short curing cycle: processing the resin at 74 C° for 1 1/2 hour and at 100 C° for 1/2 hour. Results were submitted to ANOVA and Turkey’s test and it showed that in short curing cycle, the dough like stages presented values (0.193 mm) with statistically significant difference (P<0.05) when compared with the stringy (0.246mm) and rubbery (0.240 mm) stages. While for the long curing cycle the dough stage presented values (0.199mm) with statistically significant difference (P<0.05)when compared with stringy (0.230mm) and rubbery (0.239mm) Stages, the best results were observed in section A and the worst was in section C. | ||
|
Statistics Article View: 60 PDF Download: 35 |
||