- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
The effect of circular holes on the natural frequencies of a beam using transverse vibration measurements method _ENG | ||
| Al-Rafidain Engineering Journal (AREJ) | ||
| Article 4, Volume 21, Issue 2, 2013, Pages 13-24 PDF (0 K) | ||
| DOI: 10.33899/rengj.2013.72817 | ||
| Author | ||
| Tariq Khalid Abdilrazzaq | ||
| Abstract | ||
| Abstract Defects influence in a negative way the service life of the structures. Thus, defect detection has been a considerable effort in order to eliminate this effect . In this study, the dynamical behavior of a cantilever beam, with different size of a hole, at different distances from the fixed end-for each case- have been measured, evaluated and compared with that of intact beam. It has been shown that the hole may be considered as a defect in most cases, which leads-in general- to decrease the stiffness, according to its size and place, hence affects the dynamic properties i.e., the natural frequencies and the mode shapes. A simulation process for the modal analysis using ANSYS program(release 12.1) is done in order to compare the results. In addition to that, a theoretical analysis is also done. The experimental results of the intact beam were compared with both the ANSYS program and the theoretical results. They showed an acceptable agreement between the three methods. Keywords: transverse vibration, fault detection, beam crack, beam defect, beam vibration. | ||
| Keywords | ||
| KEYWORDS; fault detection; beam crack; beam defect; beam vibration | ||
|
Statistics Article View: 349 PDF Download: 1,148 |
||