- All Journals
- Al-Qadisiyah University
- Basrah University
- Kirkuk University
- Mosul University
- The Iraqi Borad for Medical Specialization
- University of Anbar
- University of Technology
- Al Mustafa University
- Al-Zahraa University for Women
- Alnoor University
- Kunooz University
- Misan University
- Ninevah University
- Tikrit University
- University of Al-Hamdaniya
- University of Kerbala
The Effect of the Thermopress Curing Technique on the Water Sorption and Solubility of the Cold and Heat–Cured Acrylic Resins | ||
| Al-Rafidain Dental Journal | ||
| Article 3, Volume 8, Issue 1, 2008, Pages 11-17 PDF (0 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.33899/rden.2008.9034 | ||
| Author | ||
| Lamia T Rejab | ||
| Abstract | ||
| Aims: This study aims to evaluate the effect of the thermopress curing technique on the water sorptionand solubility of the cold–cured and heat–cured acrylic resins and compared this technique with thebench curing technique used for the cold–cured resin and with the conventional water bath curing techniquefor the heat–cured resin. Materials and Methods: they were to measure the water sorption andsolubility, the specimens were prepared as disks with a dimension according to the ADA SpecificationNo. 12. So specimens were divided into five groups depending on the type of the resin ( cold and heat–cured ) methods of curing which were ( thermopress, conventional water bath and bench cure ) and thetime of curing cycle. Specimens were weighed before and after immersion in the distilled water andafter drying with silica gel using an electronic balance to measure the water sorption and solubility.One way analysis of variance (ANOVA) followed by Duncan , s multiple range test was performed todetermined the significant different between the mean values among the tested groups at (p< 0.05)level of significance. Results: There is a significant differences between the water sorption and solubilityof resin that cured by the different curing methods and different curing cycle times. The watersorption and solubility of resin specimens that cured by thermopress have the higher values. Conclusions:The water sorption and solubility of the cold and heat–cured acrylic resins is affected by the curingmethod. The curing under higher pressure produces specimens with lower water sorption and solubilityvalues. | ||
| Keywords | ||
| Thermopress; water bath; bench; Acrylic Resin | ||
|
Statistics Article View: 407 PDF Download: 325 |
||