Slenderness effect on the behavior of composite RC columns under eccentric loads

Mohammed, Zaynab S.; Muhammad, Bassman R.; Resheq, Ali S.

doi:10.30684/etj.2024.147078.1702

	Slenderness effect on the behavior of composite RC columns under eccentric loads
Engineering and Technology Journal
Volume 42, Issue 11, November 2024, Pages 1304-1313 PDF (1.59 M)
Document Type: Research Paper
DOI: 10.30684/etj.2024.147078.1702
Authors
Zaynab S. Mohammed^* ; Bassman R. Muhammad; Ali S. Resheq
Civil Engineering Dept., University of Technology-Iraq, Alsina’a street, 10066 Baghdad, Iraq.
Abstract
The structural performance of reinforced concrete (RC) columns plays a pivotal role in ensuring the safety and stability of buildings and infrastructure. In structural engineering, the quest for optimizing the design and behavior of RC columns has been a persistent pursuit. This research is focused on the columns having a “large” height that the secondary bending moments induced will affect the behavior of the RC column element. Therefore, one critical aspect that has garnered considerable attention is the influence of slenderness on the behavior of these columns, particularly when subjected to eccentric loading. As structures become taller and larger, slenderness is valuable to meet the demands of modern architectural design and urbanization, and understanding how slenderness affects the response of composite RC columns becomes increasingly vital. This study is focused on the strength of composite RC slender columns under eccentric loading. As such, it aims to contribute valuable insights to structural engineering, ultimately enhancing our ability to design resilient and efficient structural systems in a world where tall and slender buildings continue to shape our urban landscapes. Due to its numerous benefits, the concrete-steel composite column with a partially enclosed or full steel section encasement is currently more attractive to people than the reinforced concrete column. Strengthening RC columns by steel channel cross-section embedded in the column will contribute to the column stiffness for ultimate strength capacity and decrease the lateral deformation. Twelve RC columns were tested under eccentric loading, a rectangular cross-section of (150×200) mm. Six have a steel structural channel embedded in the cross-section, while the rest of the RC columns have the same cross-section properties but without a steel channel inside. The improvement in column capacity was (65 to 74)% for columns under moderate eccentricity axial loading and (35 to 50)% for columns under large eccentricity axial loading. Also, the improvement in column stiffness for the lateral deflection was (142 to 69)% for columns under moderate eccentricity axial loading and 84% to 87% for columns under large eccentricity axial loading.
Highlights
12 RC slender columns casted, six of them have a structural steel channel imbedded inside the cross section. The columns tested up to failure. The variables were the eccentricities and the slenderness ratios. Good strengthening ratios have been obtained for ultimate load capacity, lateral defamation and energy absorption.
Keywords
Reinforced concrete columns; Eccentric loading; Slenderness effect; Composite cross sections; Stability analysis

References
F. Pereira, S. De Nardin, A.L.H.C. El Debs, Structural behavior of partially encased composite columns under axial loads, Steel. Compos. Struct., 20 (2016) 1305–22. https://doi.org/10.12989/scs.2016.20.6.1305 Lu G, Yu TX, Energy absorption of structures and materials, Elsevier, 2003. C-S Kim et al., Eccentric Axial Load Capacity of High-Strength Steel-Concrete Composite Columns of Various Sectional Shapes. J Struct Eng., 140 (2014). https://doi.org/10.1061/(ASCE)ST.1943-541X.0000879 Dundar, S. Tokgoz, A.K. Tanrikulu, T. Baran, Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending and axial load, Build. Environ., 43 (2008) 1109–20. https://doi.org/10.1016/j.buildenv.2007.02.010 Ketema, E. Design Aid for Composite Columns. MS.c. Thesis, Addis Ababa University, Ethiopia, 2005. Sonnenschein , K. Gajdosova, S. Gramblicka, Comparison of composite, steel and reinforced concrete columns, IOP Conf. Ser. Mater. Sci. Eng., 7 (2020) 960. http://dx.doi.org/10.1088/1757-899X/960/3/032093 Anuntasena, A. Lenwari, T. Thepchatri, Finite Element Modelling of Concrete - Encased Steel Columns Subjected to Eccentric Loadings, Eng. J., 23 (2019) 299–310. https://doi.org/10.4186/ej.2019.23.6.299 Q. Wang, Q. Shi, Y. Tao, Experimental and numerical studies on the seismic behavior of steel reinforced concrete compression-bending members with new-type section steel, Adv. Struct. Eng., 19 (2016) 255–69. http://dx.doi.org/10.1177/1369433215624320 Elsayed, M. Elassaly, W. Esmail, Behavior of eccentrically loaded R.C. columns confined with CFRP composites, Int. Res. J. Eng Technol., 5 (2018)1336–43. R. Narmatha, Ragupathi M PM, An Analytical and Experimental Study of Concrete Encased Column, Int. Res. J. Eng Technol., 4 (2017) 165-172. Campian, Z. Nagy, M. Pop, Behavior of fully encased steel-concrete composite columns subjected to monotonic and cyclic loading, Procedia Eng., 117 (2015) 439–51. http://dx.doi.org/10.1016/j.proeng.2015.08.193 E. Etman, Experimental Study on The Behavior of Slender Rectangular Columns Under Eccentric Loading, Concr. Res. Lett., 1 (2010) 45–59. C. Chen, N. J. Lin, Analytical model for predicting axial capacity and behavior of concrete encased steel composite stub columns, J. Constr. Steel Res., 62 (2006) 424–33. https://doi.org/10.1016/j.jcsr.2005.04.021 Tokgoz, C. Dundar, Experimental tests on biaxially loaded concrete-encased composite columns, Steel Compos. Struct., 8 (2008) 423–38. http://dx.doi.org/10.12989/scs.2008.8.5.423 Ellobode E., Finite Element Analysis and Design of Steel-Concrete Composite Bridges, Tanta. Univ. Egypt Elsevier Inc. 2014. ACI 318M-19, Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, 2019.
Statistics Article View: 619 PDF Download: 561