Al –Jubouri, F., Luhaib, A., Al –Rijabo, S., Al –Rijabo, O. (2025). Studying some mechanical indicators of grain drill at different soil moisture and seeding speed. , 16(2), 11-18. doi: 10.58928/ku25.16202
Firas Qahtan Hussein Al –Jubouri; Adnan ِِِAbd Ahmed Luhaib; Saad Abdul -Jabbar Al –Rijabo; Osama Saad Abdul Jabbar Al –Rijabo. "Studying some mechanical indicators of grain drill at different soil moisture and seeding speed". , 16, 2, 2025, 11-18. doi: 10.58928/ku25.16202
Al –Jubouri, F., Luhaib, A., Al –Rijabo, S., Al –Rijabo, O. (2025). 'Studying some mechanical indicators of grain drill at different soil moisture and seeding speed', , 16(2), pp. 11-18. doi: 10.58928/ku25.16202
Al –Jubouri, F., Luhaib, A., Al –Rijabo, S., Al –Rijabo, O. Studying some mechanical indicators of grain drill at different soil moisture and seeding speed. , 2025; 16(2): 11-18. doi: 10.58928/ku25.16202

Studying some mechanical indicators of grain drill at different soil moisture and seeding speed

Kirkuk University Journal for Agricultural Sciences (KUJAS)
Volume 16, Issue 2, June 2025, Pages 11-18    PDF (1.18 M)
Document Type: Research Paper
DOI: 10.58928/ku25.16202
Authors
Firas Qahtan Hussein Al –Jubouri* 1; Adnan ِِِAbd Ahmed Luhaib2; Saad Abdul -Jabbar Al –Rijabo2; Osama Saad Abdul Jabbar Al –Rijabo1
1Mosul University
2Department of Agricultural Machinery and Equipment - College of Agriculture and Forestry - University of Mosul
Abstract
     The experiment was carried out during the growing season (2023-2024) at a farmer's field in Baweiza / Telkif, northwest of Mosul city, which is located within the Semi-Arid (36°27'17.8"N 43°04'51.9" E). Where the rain amount reached 279 mm. The field soil was characterised as a Silt-Loamy soil texture. A Turkish modern disk grain drill was used in the experiment (Skalak), which is manufactured specifically for conservation agriculture, for seeding wheat grains. The experiment included three factors: the first was soil moisture with two high levels of 23% and an ideal moisture level of 17%; the second was three seeding speeds (8.3, 10.3 and 12 km/h); and the third was seeds coverage tool (with and without press wheels), the experiment was established using a Randomized Complete Block Design (RCBD) under split-split plot system, where the moisture factor occupied main plots, seeding speed was assigned to sub-plots, and sub-sub-plots were used for seeds coverage tool. The Duncan multiple range test compared means at a 0.05 significance level. The following traits were studied: Slippage percentage, soil adhesion strength, actual soil disturbance volume, and grain yield. The important results are that the ideal soil moisture of 17% achieved significant improvements in all studied qualities compared to high soil moisture of 23%. The results also indicated a significant effect at a speed of 12 km/h, where the highest value of slippage, soil disturbance volume, grain yield, and the lowest soil adhesion strength were recorded. The use of press wheels achieved a significant positive difference in soil adhesion strength, while not using press wheels led to a significant improvement in the slippage percentage. The results showed that the triple interaction between moisture content, seeding speed and seed pressure wheels did not significantly differ in the studied characteristics (slippage percentage, actual soil disturbance volume, and grain yield). However, it was found that there was a significant effect in reducing the value of adhesion force at ideal humidity with a speed of 12 km / h using seeds press wheels
Keywords
Soil moisture; pressure wheels; seeding speed; slippage; adhesion
References
  • - Chawala, K., & Kahlon, M. S. (2018). Effect of land management practices on soil moisture storage characteristics. Journal of Applied and Natural Science, 10(1), 386-392.‏
  • - Baker, C. J., & Saxton, K. E. (2015). Conservation tillage: The role of cover wheels in improving seedling establishment. Agronomy Journal, 107(3), 983-991.‏
  • Jasa, B. J. (2011). Planting equipment for no-till. Proceedings of the 2011 virginia no-tillage alliance conference. Rokingham county fairgrounds harrisonburg, virginia.
  • Al-Qaadi, Khalid Ali Salem, Abdul Sattar Asmir Jassim Al-Rajbo, Al-Kamil Hamad Mohammed Tola (2019) Cultivation by disc grain drill in no-till farming systems – a review of technical and field matters, Micro Research Chair, King Saud University, Saudi Arabia, King Saud University Press.
  • – Younis, A. F., Tahir, H. T., & Kareem, T. H. (2020). A cleaning device to improve the seeding performance of a zero-tillage seeder. Int. J. Agricult. Stat. Sci. Vol, 16(1), 2020.‏
  • - Al-Ahmad, S. F. H., Luhaib, A. A. A., Al-Jarrah, M. A. N. (2022), Effect of moisture content and Tractor traffic on power requirements and some physical properties of soil. Kirkuk University Journal For Agricultural Sciences (KUJAS), 13(4).
  • - Manuwa, S. I. and O. C. Ademosun, (2007). Draught and soil disturbance of model tillage tines under varying soil parameters. Agricultural engineering international: the CIGR e journal.
  • - Iskenderov, R., Lebedev, A., Lebedev, P., & Zaharin, A. (2020). Improvement of operability of double-disc coulters of grain seeders with UHMWPE coating on soils of various moisture. In LLU Conference Sytem (LLUCS) (pp. 22-27).‏
  • - Sheikh Ali, Dhanoon Younis Jasin Ali (2018). Additional weights effect on tractor (M.F.285S) on some mechanical qualities under different humidity conditions using mouldboard plough. Master's Thesis, College of Agriculture and Forestry, University of Mosul.
  • - Alhamadany, N. J. M., & Alrijabo, A. A. J. (2020). Influence of press wheels, row spacings and sowing rates and yield and its components of wheat crop (Triticum aestivum L.) cultivated by zero tillage method in glyukhan district. Mesopotamia Journal of Agriculture,48(3), 86-98.
  • - Tahir, H. T. (2020). Evaluation and Comparative study of row cleaner modification through improving performance of the no-till planter and wheat production. Plant Archive, 20, 159-163.‏
  • - Daoud, Khalid Muhammad and Zaki Abdul Elias (1990) Statistical Methods for Agricultural Research, Ministry of Higher Education and Scientific Research, University of Mosul, Directorate of Dar Al-Kutub for Printing and Publishing.
  • - Mashriqi, Samir Abdullah Ali (2000). Three-point hitch development and their impact on the performance of linked tractors with mouldboard plough, soil physical characteristics and wheat yield. PhD thesis, Agricultural Machinery Department, College of Agriculture and Forestry, University of Mosul.
  • - Al-Suhaibani, A. M., & Wehbe, A. N. (1985). Principles Of Agricultural Machinery. King Saud University, Kingdom Of Saudi Arabia.‏
  • - Bukhari SM.A.Bhutto: J.M.Baloch A.B.Bhutto and N.Mmirain (1988). Performance of selected tillage implements. J.AMA. 19(4):9-14
  • - Talabani, Jinan Hikmat (2002). Interaction effect between soil moisture, tillage depths and tractor speed on productivity and some physical soil characteristics using triple disc plow - Master Thesis, Agricultural Machinery Department, College of Agriculture - University of Baghdad.
  • - Desbiolles, J. (2009). Using disc grain drills in wet and sticky soils-Groundbreaker special issue 50 (Feb 2009)-. Australian Ag-Contractor and Large Scale Farmers, 6-7.‏
  • - Mohammad, Musab Abdul Wahid, Saad Abdul-Jabbar Al-Rajbo and Mahmoud Hassan Rafiq (2011), Evaluation of grain drill performance (Gaspardo -250Sc) at ground speeds and different seed quantities in chickpea production (Cicer arietinum L.) Agricultural Machinery Department / College of Agriculture and Forestry / University of Mosul, Journal of Rafidin Agriculture, Volume (39), Issue (1), 2011.
  • - Hassan, Khairia Abed Qaddo (2018) The effect of weapon shape and ground velocity of no-till grain drill on some mechanical characteristics and wheat yield using triflane pesticide, Master Thesis, College of Agriculture and Forestry, University of Mosul.
  • [20] - Rainbow, R. W. and Dare, M. W. (1997). Summary of nitrogen and phosphorus fertilizer placement research 1993-1995 in farming systems developments in Research, 79(3), 239-264.‏
  • - Al Nuaimi, B., & Al Rijabo S. (2020). STUDY OF SOME FIELD INDICATORS FOR THE CHISEL PLOW BY USING LOCALLY SHARES. Mesopotamia Journal of Agriculture, 48(3), 30-0.
  • Rajab, Adel Ahmed Abdullah, (2005), Development of the locally manufactured excavator, thesis PhD, Faculty of Agriculture and Forests, University of Mosu
  • Vermeulen G D; Klooster J J; Sprong M C; Verwijs B R (1997). Effect of straight and spiral sugar beet extraction paths and lift acceleration on soil tare and relative soil adherence.. Netherlands Journal of Agricultural Science, 45(1), 163-169.
  • - Harris, H. D. and Bakker, D. M. (1994). A soil stress transducer for measuring in situ soil stresses. Soil and tillage res, 29 (4): 35-48.
  • Al-Alabiedi, K. S. A., Nassar, M. J. M., & AbdulJabbar, E. A. (2016). Evaluation the performance of developed moldboard plow and it's effect on some performance indicators of the machinery unit. The Iraqi Journal of Agricultural Sciences, 47(6), 1514-1519.‏
  • Al-Hadithi, Saba Abdel Aziz and Abdel Rahman Ayoub Al-Sabbagh (2012), The effect of plow type on some technical indicators and some physical soil characteristics under different velocity levels. Iraqi Journal of Soil Sciences, Volume (12), Issue 1.
  • - Asoodar, M. A., Bakhshandeh, A. M., Afraseabi, H., & Shafeinia, A. (2006). Effects of press wheel weight and soil moisture at sowing on grain yield. Journal of Agronomy, 5(2), 278-283
  • Chen, Y., Tessier, S., & Irvine, B. (2004). Grain drill and crop performances as affected by different grain drill configurations for no-till seeding. Soil and Tillage Research, 77(2), 147-155.‏
  • - Al-Obaidi, Faiz Fawzi Majeed (2005), Study the effect of interaction between depths and seedling speed on wheat yield by using two different grain drills in the central region of Iraq, Master's Thesis, College of Agriculture, University of Baghdad.
 

Statistics
Article View: 277
PDF Download: 268


Journal Management System. Powered by iJournalPro.com