Numerical Analysis of Cooling Device Height on Temperature and Airflow Distribution in a Confined Space

References

[1]      Guven, S “Calculation of optimum insulation thickness of external walls in residential buildings by using exergetic life cycle cost assessment method: Case study for Turkey” Environ. Prog. Sustain. Energy, 38(6), pp. 1–10, 2019, doi: 10.1002/ep.13232.

[2]      Gao, T,  Sandberg, L.I.C., and Jelle, B.J. “Nano insulation materials: Synthesis and life cycle assessment” Procedia CIRP, 15, pp. 490–495, 2014, doi: 10.1016/j.procir.2014.06.041.

[3]      Cao, X., Dai, X., and Liu, J. “Building energy-consumption status worldwide and the state-of-the-art technologies for zero-energy buildings during the past decade” Energy Build, 128, pp. 198–213, 2016, doi: 10.1016/j.enbuild.2016.06.089.

[4]      Lee, G.H., Park, B.K., and Lee, W. “Microstructure and property characterization of flexible syntactic foam for insulation material via mold casting” Int. J. Precis. Eng. Manuf. - Green Technol., 4(2), pp. 169–176, 2017, doi: 10.1007/s40684-017-0021-2.

[5]      Morsy, M., Fahmy, M., Abd Elshakour, H., and Belal, A.M. “Effect of Thermal Insulation on Building Thermal Comfort and Energy Consumption in Egypt” J. Adv. Res. Appl. Mech. J., 43(1), pp. 8–19, 2018.

[6]      Leng, G. et al. “Preparation and properties of polystyrene/silica fibres flexible thermal insulation materials by centrifugal spinning” Polymer (Guildf), 185, 2019, doi: 10.1016/j.polymer.2019.121964.

[7]      Xue, X., Wu, H., Zhang, X., Dai, J. and Su, C. “Measuring energy consumption efficiency of the construction industry: The case of China” J. Clean. Prod., 107, pp. 509–515, 2015, doi: 10.1016/j.jclepro.2014.04.082.

[8]      Akyüz, M.K., Altuntaş, Ö. , and Söğüt, M.Z. “Economic and environmental optimization of an airport terminal building’s wall and roof insulation” Sustain., 9(10), 2017, doi: 10.3390/su9101849.

[9]      Abu-Jdayil, B., Mourad, A.H., Hittini, W., Hassan, M., and Hameedi, S. “Traditional, state-of-the-art and renewable thermal building insulation materials: An overview” Constr. Build. Mater.,  214, pp. 709–735, 2019, doi: 10.1016/j.conbuildmat.2019.04.102.

[10]    Zhao, J. et al., “Development of high thermal insulation and compressive strength BPP foams using mold-opening foam injection molding with in-situ fibrillated PTFE fibers” Eur. Polym. J., 98, pp. 1–10, 2018, doi: 10.1016/j.eurpolymj.2017.11.001.

[11]    Nyers, J., Kajtar, L., Tomić, S., and Nyers, A.“Investment-savings method for energy-economic optimization of external wall thermal insulation thickness” Energy Build., 86, pp. 268–274, 2015, doi: 10.1016/j.enbuild.2014.10.023.

[2]      Adamczyk , J, and Dylewski, R. “The impact of thermal insulation investments on sustainability in the construction sector” Renew. Sustain. Energy Rev., 80, 2016, pp. 421–429, 2017, doi: 10.1016/j.rser.2017.05.173.

[13]    Huang, H., et al., “Optimum insulation thicknesses and energy conservation of building thermal insulation materials in Chinese zone of humid subtropical climate” Sustain. Cities Soc., 52, 2019, p. 101840, 2020, doi: 10.1016/j.scs.2019.101840.

[14]    Tsalagkas, D., Börcsök, Z., and Pásztory, Z. “Thermal, physical and mechanical properties of surface overlaid bark-based insulation panels” Eur. J. Wood Wood Prod., 77(5), pp. 721–730, 2019, doi: 10.1007/s00107-019-01436-5.

[15] Zhang, C., Wang, J., Luo, X., Song, L., Li, J., and Feng, Z. “Experimentally measured effects of height and location of the vortex generator on flow and heat transfer characteristics of the flat-plate film cooling” Int. J. Heat Mass Transf., 141, pp. 995–1008, 2019, doi: 10.1016/j.ijheatmasstransfer.2019.07.042.

[16] Chen, Q., and Liu, X.  "CFD analysis of air distribution and thermal comfort in mechanically ventilated rooms" Energy and Buildings, 285, 2023, 112883.

[17] Zhang, Y., Wang, S., and Jin, X. "Influence of air-supply device location on indoor airflow and temperature distribution" Applied Thermal Engineering, 238, 2024, 121987.

[18] Kong, X., et al. "Numerical investigation of jet-induced airflow and thermal stratification in confined spaces" Building and Environment, 239, 2023, 110394.

[19] Elsheikh, A. H., et al. "CFD-based optimization of HVAC operating parameters for energy-efficient buildings" Energy Conversion and Management, 301, 2024, 118147.

[20] Huang, L., and Chen, Z. "Recent advances in numerical modeling of indoor airflow and thermal comfort" Renewable and Sustainable Energy Reviews, 189, 2025, 114356.

[21] Ariyarathna, I.S., Abeyrathna, W.P., Danilina, N., and Halwatura, R.U. "Life cycle cost-based design of energy-efficient office buildings for sustainable urban transition in tropical cities" Urban Transitions, 5, 2026, 100026.

[22] Huang, P., Zheng, X., Zhang, Y., and Shen, P. "Space layout automation and optimization for energy-efficient buildings: A multi-objective evolutionary approach with machine learning analytics" Energy and Buildings, 358, 2026, 117213.

[23] Poosapadi, D., Devi, G.M., Padmapriya, G., Srinivasan, K., Logeshwaran, T., Rani, J.A., Kumar, C.R., kumar, E.R., and Khan, M.A. "Energy Efficient Smart Control Strategies: Applying Machine Learning to Enhance Efficiency in Eco-Friendly Building Management for Renewable Energy Systems" Sustainable Computing: Informatics and Systems, 50, 2026, 101315.

[24] Zhang, J., Rasdi, M.T.M., Zainordin, N., and Qin, Y. "A comprehensive review of advanced energy-efficient technologies for building envelopes: Focus on walls, windows, and roofs" Energy Reports, 15, 2026, 108981.

[25] Liu, K., Xu, X., Lin, D., Zhang, R., Zhao, L., Abuduwayiti, A., and Causone, F. "A scalable and efficient framework for city-scale building energy modeling with microclimate considerations" Sustainable Cities and Society, 138, 2026, 107187.

[26] Zhou, Z., Jia, B., Yuan, W., and Zhang, J. "An efficient hybrid prediction methodology for building vibrations near high-speed railway bridges with analysis of resultant vibrational energy transfer characteristics" Journal of Sound and Vibration, 630, 2026, 119714.

[27] Konhäuser, K. and Werner, T. "Uncovering the financial impact of energy-efficient building characteristics with eXplainable artificial intelligence" Applied Energy, 374, 2024, p. 123960. DOI: 10.1016/j.apenergy.2024.123960.

[28] Behr, S. M., Küçük, M., Neuhoff, K. (2023): "Energetische Sanierung von Gebäuden kann durch Mindeststandards und verbindliche Sanierungsziele beschleunigt werden". https://www.econstor.eu/handle/10419/272122.

[29] Sun, Y., Haghighat, F., and Benjamin C.M. "A review of the-state-of-the-art in datadriven approaches for building energy prediction" Energy and Buildings 221, 2020, p. 110022. DOI: 10.1016/j.enbuild.2020.110022.

[30] Werner, T., Konhäuser, K., and Schwarz, N. "Evaluating strategic retrofit measures for energy-efficient residential buildings with artificial intelligence" Energy and Buildings, 2026, 117205.

[31] Guo, X., Zhong, Y., Sui, Q., Gong, Ch., Zhai, C., Liu, B., Li, N., and Cai, G. "Dynamic photothermal modulation in energy-efficient buildings" Materials Today, 91, 2025, Pages 84-102.

[32]    Zhang, C., Wang, J., Luo, X., Song, L., Li, J., and Feng, Z.“Experimentally measured effects of height and location of the vortex generator on flow and heat transfer characteristics of the flat-plate film cooling” Int. J. Heat Mass Transf., 141, pp. 995–1008, 2019, doi: 10.1016/j.ijheatmasstransfer.2019.07.042.