1.

Elevated Temperature Corrosion of Mechanical Properties and Fatigue Life of 7025 Aluminum Alloy

Pages 1-7
Mohammed H. Alwan; Hussain J. Al-Alkawi; Ghada A. Aziz
2.

Thermal Performance of an Evacuated-Tube Solar Collector Using Nanofluids and an Electrical Curtain Controlled by an Artificial Intelligence Technique

Pages 8-19
Hussam J. Rashid; Khalid F. Sultan; Hosham S. Anead
3.

Corn Oil Performance’s A Bio Cooling Fluid in Electric Distribution Transformer

Pages 20-30
Ahmed A. Khudhair; Mohammed H. Jabal; Samar J. Ismail
4.

Design and Implementation of an Electromechanical Brake System

Pages 31-39
Haider N. Faisal; Farag M. Mohammed; Jamal A. Mohammed
5.

The Combining Effect of Inclination Angle, Aspect Ratio and Thermal Loading on the Dynamic Response of Clamped-Clamped Pipe Conveying Fluid

Pages 40-48
Jabbar H. Mohmmed; Mauwafak A. Tawfik; Qasim A. Atiyah
6.

Optimization Process for Biodiesel Production From Waste Cooking of Vegetable Oil by Microwave Irradiation

Pages 49-59
Raheek I. Ibrahim; Ahmed H. Reja; Abeer J. Kadhim
7.

Design and Implementation of Remote Real-Time Monitor System for Prosthetic Limbs

Pages 60-65
Hussein A. Mansoure; Hadeel N. Abdullah
8.

Flow Improvement and Viscosity Reduction for Crude Oil Pipelines Transportation Using Dilution and Electrical Field

Pages 66-75
Noor I. Jalal; Raheek I. Ibrahim; Manal K. Oudah
9.

Manufacturing and Calibration of Conical Springs Lateral Stiffness Meter

Pages 76-81
Muhammad S. Tahir; Shakir S. Hassan; Jumaa S. Chiad
10.

Experimental Exergetic And Energetic Analysis of Different (PV) Array Configurations

Pages 82-89
Dalya A. Omer; Mahmoud M. Mahdi; Ahlam L. Shuraiji
11.

A Comparative Experimental Study Analysis of Solar Based Thermoelectric Refrigerator Using Different Hot Side Heat Sink

Pages 90-98
Nora F. Numan; Mahmmoud M. Mahdi; Majida K. Ahmed
12.

Heat Transfer in Electronic Systems Printed Circuit Board: A Review

Pages 99-108
Mustafa E. Kadum; Ahmed A. Imran; Sattar Aljabair
13.

Experimental Investigation of Artificial Cavities Effect of Single-Phase Fluid Flow and Heat Transfer in Single Microchannel

Pages 109-119
Qahtan A. Al-Nakeeb; Ekhlas M. Fayyadh; Moayed R. Hasan
14.

Evaluating the Adhesive Properties of Four Types of Conventional Adhesives

Pages 120-128
Muhanad H. Mosa; Mohsin N. Hamzah
15.

A-Review for the Cooling Techniques of PV/T Solar Air Collectors

Pages 129-136
Wisam H. Saleh; Abdullateef A. Jadallah; Ahlam L. Shuraiji
16.

Experimental and Numerical Flexural Properties of Sandwich Structure with Functionally Graded Porous Materials

Pages 137-147
Emad Njim; Sadeq H. Bakhi; Muhannad Al-Waily
17.

Experimental Investigation on the Effect of Adding Butanone to Gasoline in SI Engine Emissions and Performance

Pages 148-158
Abed Al-Khadhim M. Hassan; Sadeq A. Jassam
18.

Blind Assistive System based on Real Time Object Recognition using Machine learning

Pages 159-165
Mais R. Kadhim; Bushra K. Oleiwi
19.

Development the Mechanical Properties of the Acrylic Resin (PMMA) by Added Different Types of Nanoparticles, Used for Medical Applications

Pages 166-171
Sura H. Ahmed; Waffa M. Salih
20.

Solving Mixed-Model Assembly Lines Using a Hybrid of Ant Colony Optimization and Greedy Algorithm

Pages 172-180
Huthaifa Al-Khazraji; Sohaib Khlil; Zina Alabacy
21.

Effect of Machining Parameters on Surface Roughness and Metal Removal Rate for AISI 310 L Stainless Steel in WEDM

Pages 181-188
Muayad M. Ali; Abbas F. Ibrahim
22.

The Effect of Process Parameters on the Compression Property of Acrylonitrile Butadiene Styrene Produced by 3D Printer

Pages 189-194
Sabreen A. Oudah; Hind B. Al-Attraqchi; Nassir A. Nassir
23.

The Effect of Secondary Slow on Droplets Behavior in Gas-Liquid Mixing Process Downstream of a Curved Duct

Pages 195-206
Abdulsattar J. Mohammed; Akeel A. Nazzal
24.

Optimization of Design Parameters for Manufacturing a Radial Active Magnetic Bearing with 12-Poles

Pages 207-216
Mohamed N. Hamad; Muhannad Z. Khalifa; Jamal A. K. Mohammed
25.

Improvement of Surface Roughness in Single Point Incremental Forming Process by the Implementation of Controlled Vibration

Pages 217-225
Reham A. Nema; Mauwafak A. Tawfik; Muthanna H. Sadoon
26.

Modeling and Simulation of Telescopic Hydraulic for Elevating Purposes

Pages 226-232
Istabraq H. Abed Al-Hady; Farag M. Mohammed; Jamal A.K. Mohammed
27.

Electromechanical Design and Manufacturing of Dynamic Buckling Test Rig Under Various Temperature Conditions

Pages 233-240
Shaymaa M. Mshattat; Hussain J.M Al-Alkawi; Ahmed H. Reja
28.

Effect of Temperature and Humidity Factors on Water Production Using Solar Energy with Smart Controlling

Pages 241-248
Ghusoon A. Aboud; Hashim A. Hussein; Ali H. Numan
29.

Control of PV Panel System Temperature Using PID Cuckoo Search

Pages 249-256
Fadi M. Khaleel; Ibtisam A. Hasan; Mohammed J. Mohammed
30.

Design of a Sliding Mode Controller for a Prosthetic Human Hand’s Finger

Pages 257-266
Hussein Sh. Majeed; Saleem K. Kadhim; Alaa A. Jaber
31.

A Modified Kalman Filter-Based Mobile Robot Position Measurement using an Accelerometer and Wheels Encoder

Pages 267-274
Ali Madhloom; Firas A. Raheem; Azad R. Kareem
32.

Effect of the Waste Rubber Tires Aggregate on Some Properties of Normal Concrete

Pages 275-281
Abdul R. Kamel; Ahmed H. Ali; Nahedh Mahmood; Mohammed M. Kadhum
33.

Preparation of Metakaolin Based Geopolymer Foam Using a Combination of Na and K Types of Alkali Activators

Pages 282-289
mohammed S. Radhi; Ahmed M. Al-Ghaban; Imad A. Disher


Journal Management System. Powered by iJournalPro.com